|
a) Ridge Clip
The ridge clip is designed to secure each ridge piece to both ridge and hip boards. The top
of the ridge clip is fitted on the middle edge of the ridge piece and the bottom part is
hooked on to a wire that is secured along the length of the ridge or hip board at one metre
intervals. The wire should be firmly taut at each secured point.
b) Tile Clip
The tile clip allows for simple hand installation and the roof tile is tied from the nose end direct
to the roofing batten. The side lap clip provides the tile roof with the added safeguard of resisting
all upward pressure resulting from high winds and will allow for any timber shrinkage.
Both ridge and tile clips conform to AS 2050-1995.
| 
